Upright Early Suppression Fast Response Fire Sprinkler Heads
K17(242) Fire Sprinkler Heads are installed in places where the slope of the building roof or ceiling does not exceed 170mm/m. The sprinkler splash plate must be installed parallel to the ceiling or ceiling. The nozzle spacing should not be less than 2.4m and should not be greater than 3.7m. When the height of the protected object is greater than 7.5m or the clearance height of the protected space is greater than 9m, the nozzle spacing should not be greater than 3m.
The temperature sensing element in the release mechanism of the welded fusible element nozzle is connected by two equal-length connectors through the fusible element welding layer. When the operating temperature is reached, the solder joints are melted, the connectors are separated, and the nozzle sprinkles water. Under normal circumstances, the force generated by the water pressure applied to the nozzle inlet and the force exerted on the nozzle body by the nozzle assembly load will generate a lot of mechanical pressure on the thermally sensitive components. The welded fusible component nozzle adopts the principle of leverage to reduce the effect on the fusible The force on the connector. With this structure of the nozzle, the mechanical pressure is decomposed into the force on the pillar, the mechanical force of the fusible connection and the flux load between the fusible connection parts, so that the flux withstands low force and can avoid reaching the operating temperature. The components of the required flux cause cold flow under high stress.
The Specification of K242 Fire Sprinkler Heads
| K FACTOR | K17@US(242@Metric) |
| Thread Size | DN20(3/4") |
| Connecting Thread | BSP(NPT Optional) |
| Main Material | Brass |
| Sensitive Element | Fusible Alloy |
| Seal Material | NBR(Teflon Optiona) |
| Surface Finishing | Natural Brass |
| Temperature | 74°C,100°C |
The FAQ of K242 Fire Sprinkler Heads
Q1:Can we make field trips and visit your factory?
Yes, We are pleased you come to visit our factory.Welcome!
Q2: Whether the product supports OEM customization？
Yes. Please inform us formally before our production and confirm the design and other requirements firstly .
Q3: How many agents the company currently has overseas?
Currently we have 2 agents abroad. One in Israel and one in Maldives.
Hot Tags: pendent early suppression fast response fire sprinkler heads, China, manufacturers, suppliers, wholesale, price, DN100 Fire Hydrant, Fire Hose Monitor, Open Type Spray Nozzles, Foot Type Valve With Strainer, Fire Truck Fire Monitor, Groove Type Deluge Valves
onitor Fire Fighting" target="_blank">Portable Monitor Fire Fighting, Foam Monitor, Fixed Remote Control Foam Monitor
